Blinds & curtains

Rollease Acmeda Automate

acmeda

Built inLocal push

The Rollease Acmeda Automate integration allows you to control and monitor covers via your Rollease Acmeda Automate hub. The integrations communicates directly with hubs on the local network, rather than connecting via the cloud or via RS-485. Devices are represented as a cover for monitoring and control as well as a sensor for monitoring battery condition.

Documentation Source code

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`cover`	Blind, garage door, window or door

2 reports below say how a device from this integration behaves in the Home app.

What people report

Rollease Acmeda shades via the Pulse Hub work locally, but several users get 'No devices found on the network'.

Works2
Partly works1

Device	In Home Assistant	In Apple Home	What they said	Source
Acmeda Rollease shades	Works	Works in Home Battery shown in Apple Home after re-saving entity	Battery status disappeared; fixed by update Saved copy … and Apple Home app) after I did the following: 1. Within HA dashboard, press gear icon for entity 2. Change nothing 3. Press Update 4. Repeat for all shades and tada! I'd say this is a workaround rather than a fix and the issue I have called out in troubleshooting is also still present. As a result, I'll leave this still open for others to see and if @atmurray can investigate these issues. Battery status is no longer visible in the entities or as it appears in the dashboard (it was working fine a couple months ago). When I click into a battery entity I see a graph and if I click on the graph … Excerpt saved from GitHub on 2026-10-23.	Issue #122344 · 2024-07
Rollease Acmeda shades	Works Local	Works in Home Battery percentages show in Apple Home after re-saving entities	Battery status issue resolved by update Saved copy … and Apple Home app) after I did the following: 1. Within HA dashboard, press gear icon for entity 2. Change nothing 3. Press Update 4. Repeat for all shades and tada! I'd say this is a workaround rather than a fix and the issue I have called out in troubleshooting is also still present. As a result, I'll leave this still open for others to see and if @atmurray can investigate these issues. Battery status is no longer visible in the entities or as it appears in the dashboard (it was working fine a couple months ago). When I click into a battery entity I see a graph and if I click on the graph … Excerpt saved from GitHub on 2026-10-23.	Issue #122344 · 2024-07
Automate Pulse Hub v1	Partly works Local		Some users get No devices found; HACS custom version used instead Saved copy The problem The Rollease Acmeda Automate integration reports "No devices found on the network" when adding it, even though the hub is powered on, reachable, and has a static IP via DHCP reservation. This is the same symptom reported in #100330 and #147843, both closed as stale without resolution, filing with debug evidence attached this time. Environment ruled out as the cause: - Hub has a fixed IP via DHCP reservation (not an IP-change issue) - Hub and HA confirmed on the same subnet/network - Router is ASUS, confirmed AP Isolation is disabled, IGMP Snooping is enabled, Multicast Rate is … Excerpt saved from GitHub on 2026-10-23.	Issue #178524 · 2026-08

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local push

Talks to the device on your network, and the device tells Home Assistant the moment something changes.

Details

Installs (analytics)	9
Added in	Home Assistant 0.111
Set up in the UI	Yes
Maintainers	@atmurray

Devices listed in its documentation

Automate Pulse Hub v1

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.