Airobot
airobot
The Airobot integration allows you to control and monitor Airobot smart thermostats for intelligent floor heating control via the local REST API. The thermostat uses adaptive learning with a TPI algorithm to maintain stable temperatures and optimize energy efficiency. Optional built-in carbon dioxide and humidity sensors monitor indoor air quality for a healthier living environment.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
climate | Thermostat | |
sensor | Sensor (CO₂, humidity, temperature) | |
button | Button (as a switch) |
What people report
Airobot TE1 thermostat supported over local REST API only; ventilation unit support in progress.
- Works1
- Requested1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Airobot Smart Thermostat TE1 | Works Local | Needs firmware 1.8+, local REST API enabled; heating onlySaved copySupported devices: Airobot Smart Thermostat TE1 with firmware version 1.8 or later. Limitations: Local API only: The integration only supports the local REST API. Cloud-based control through the Airobot cloud service is not supported. Manual API enablement: The local REST API must be manually enabled on the thermostat before the integration can connect. It is disabled by default for security reasons. Firmware requirements: Only firmware version 1.8 or later is supported. Older firmware versions do not provide the local REST API. Heating only: The thermostat is designed for floor heating … Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Airobot ventilation unit | Requested Local | Initial support PR open, Modbus TCPSaved copyProposed change Adds Airobot ventilation units (heat recovery ventilators) to the existing `airobot` integration. The thermostats use a local REST API; the ventilation units are controlled over Modbus TCP, so they are added as a second device type. This is the first of a series of PRs. It contains: - Config flow: the first step is now a choice between *Thermostat* and *Ventilation unit*. A ventilation unit is added by h Excerpt saved from GitHub on 2026-10-23. | PR #185630 · 2026-10 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local polling
Talks to the device on your network, asking it for updates every so often.
Found automatically over
- DHCP
Details
| Installs (analytics) | 7 |
|---|---|
| Quality scale | Platinum |
| Added in | Home Assistant 2025.12 |
| Set up in the UI | Yes |
| Maintainers | @mettolen |
Devices listed in its documentation
- Airobot Smart Thermostat TE1 with firmware version 1.8 or later
Limitations from the docs
- Local API only: The integration only supports the local REST API. Cloud-based control through the Airobot cloud service is not supported.
- Manual API enablement: The local REST API must be manually enabled on the thermostat before the integration can connect. It is disabled by default for security reasons.
- Firmware requirements: Only firmware version 1.8 or later is supported. Older firmware versions do not provide the local REST API.
- Heating only: The thermostat is designed for floor heating control only and does not support cooling modes.
- Optional sensors: Carbon dioxide and floor temperature sensors are only available if the corresponding hardware is installed in your thermostat model.
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
