Ariston
fustom/ariston-remotethermo-home-assistant-v3 · vv0.19.9
Ariston NET remotethermo integration for Home Assistant based on API
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
climate | Thermostat | |
binary_sensor | Sensor (motion, contact, leak, smoke…) | |
sensor | Sensor (temperature, humidity, air quality…) | |
water_heater | Water heater (as a thermostat) | |
select | Mode picker (as switches) |
What people report
Ariston NET cloud devices such as Lydos and Genus One+ work; BSB-type Elco Thision heat pumps needed extra work. Local control is not planned.
- Works2
- Partly works1
- Requested1
- Won’t be supported1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Ariston Genus One+ Wifi 24 EU | Works Cloud | Works; a temporary login block caused unknown error, later clearedSaved copyHello Fustom, First of all, thank you your great job. Describe the bug First time, I managed to integrate my brand new Ariston Genus One+ Wifi 24 EU. All sensors, switches appeared as expected. Then suddenly all sensors got unknown. Maybe it was not the best decision, but I deleted the entire integration, and started from scratch After that, if I try to login, I get an error message saying that an unknown issue has occurred. Probably the authentication goes fine, because if I intentionally type a wrong pwd, I get a different error message. Expected behavior I should be able to integrate my … Excerpt saved from GitHub on 2026-10-23. | Issue #344 · 2024-05 | |
| Ariston Lydos water heater | Works Cloud | More compatible entities enabledSaved copyI reviewed the current available entities and added Lydos device support wherever there was a compatibility match. PS: Thanks @fustom for making the initial changes to support Lydos devices. I've been pretty caught up in the meantime. Excerpt saved from GitHub on 2026-10-23. | PR #267 · 2024-01 | |
| Elco Thision S Plus 13 | Partly works Cloud | BSB zone mode and presets still an open PRSaved copyAdd BSB zone mode and preset support for BSB devices (e.g. Elco Thision S Plus) ### Problem BSB devices like the Elco Thision S Plus 13 lack proper zone mode support in the climate entity. The heater supports 4 modes (Protection, Automatic, Reduced, Comfort) but none of these are exposed in Home Assistant. Additionally, the target temperature always shows the comfort setpoint, even when the device is in Reduced mode or when the Automatic schedule is in a reduced period. There is also a bug in the upstream library where `get_zone_mode()` uses `value or BsbZoneMode.UNDEFINED`, which treats mode … Excerpt saved from GitHub on 2026-10-23. | PR #473 · 2026-05 | |
| Ariston Velis scheduled scenario | Requested Cloud | Scheduled scenario get/set requested for Velis heatersSaved copyFor new device check my wiki https://github.com/fustom/ariston-remotethermo-home-assistant-v3/wiki/Unsupported-whe%7Csystem-type For new entity - Ariston device type (check the integration Device info): [e.g. VELIS Evo2 | Model 4, VELIS LydosHybrid, GALEVO] Describe the solution you'd like Thanks a lot for your work! Would it be possible to have the scheduled scenario available (GET and SET) for the VELIS water heaters? Additional context, debug log Add any other context or screenshots about the feature request here. Excerpt saved from GitHub on 2026-10-23. | Issue #463 · 2026-04 | |
| Ariston local-only control | Won’t be supported Cloud | Local mode would need extra eBUS hardware; request closed not plannedSaved copy@redstyle82 this is a separate topic with additional hardware to get/set data from bridgenet bus from your local equipment and fully avoid Ariston cloud. You could start with this helpful links https://github.com/wrongisthenewright/ebusd-configuration-ariston-bridgenet https://github.com/komw/ariston-bus-bridgenet-ebusd and https://github.com/komw/ariston-bus-bridgenet-ebusd/issues/7 This should help at least for the first steps. Excerpt saved from GitHub on 2026-10-23. | Issue #272 · 2024-01 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Cloud polling
Goes through the maker’s cloud, asking it for updates every so often. Needs the internet and an account.
Details
| Installs (analytics) | 2,494 (0.35%) |
|---|---|
| GitHub stars | 291 |
| Latest version | v0.19.9 (2026-02-06) |
| Set up in the UI | Yes |
| Maintainers | @fustom |
| License | MIT |
Notable forks
Forks with stars, or with code pushed at least 90 days after the original’s last push. Useful when the original goes quiet.
| Fork | Stars | Last push | Description |
|---|---|---|---|
| mauropriori/ariston_net Newer code | ★ 2 | 2026-09-17 | Resilient Ariston Remote Thermo integration for Home Assistant, focused on Nimbus and Lydos. |
| d0n0van/ariston-remotethermo-home-assistant-v3 Newer code | ★ 2 | 2026-05-18 | Ariston NET remotethermo integration for Home Assistant based on API |
| cgollner/ariston-remotethermo-home-assistant-v3 Newer code | ★ 0 | 2026-10-23 | Ariston NET remotethermo integration for Home Assistant based on API |
| JNP2020/ariston-remotethermo-home-assistant-v3 Newer code | ★ 0 | 2026-07-10 | Ariston NET remotethermo integration for Home Assistant based on API |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
