Lighting

AwoX MESH control

fsaris/home-assistant-awox · v0.2.0

HACSLocal push

AwoX mesh light integration for Home Assistant

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`light`	Light
`switch`	Switch or outlet
`sensor`	Sensor (temperature, humidity, air quality…)

What people report

AwoX/Eglo Bluetooth mesh lights (ble.tlmesh) work locally, but connections can drop and the AwoX app interferes. Zigbee and WiFi AwoX lights are not supported.

Works6
Partly works2
Won’t be supported1

Device	In Home Assistant	What they said	Source
Eglo Crossling ESpot 120 RGBW spot	Works Local	Confirmed working, HW 4.30 firmware 2.2.6 Saved copy … not an issue -- just didn't know of a better way to let you know. Anyhow, I can confirm that the integration works with following lights (THANKS!): - ESpot 120 (Eglo Crossling RGBW Spot with diameter of 120 mm, HW 4.30, firmware 2.2.6) - ETriSpot 85 (set of 3 Eglo Crossling RGBW Spots with diameter of 85 mm, HW 4.31, firmware 2.2.6) - ESpot 170 (Eglo Crossling RGBW Spot with diameter of 170 mm, HW 4.30, firmware 2.2.6) Also, from the RPi 4B, where I run the HA, it is circa 10 meters to the lights. Integrated bluetooth on the RPi couldn't make it. So, I disabled it in the /boot/config.txt by … Excerpt saved from GitHub on 2026-10-23.	Issue #22 · 2021-02
Eglo Crossling ESpot 170 RGBW spot	Works Local	Confirmed working, HW 4.30 firmware 2.2.6 Saved copy … not an issue -- just didn't know of a better way to let you know. Anyhow, I can confirm that the integration works with following lights (THANKS!): - ESpot 120 (Eglo Crossling RGBW Spot with diameter of 120 mm, HW 4.30, firmware 2.2.6) - ETriSpot 85 (set of 3 Eglo Crossling RGBW Spots with diameter of 85 mm, HW 4.31, firmware 2.2.6) - ESpot 170 (Eglo Crossling RGBW Spot with diameter of 170 mm, HW 4.30, firmware 2.2.6) Also, from the RPi 4B, where I run the HA, it is circa 10 meters to the lights. Integrated bluetooth on the RPi couldn't make it. So, I disabled it in the /boot/config.txt by … Excerpt saved from GitHub on 2026-10-23.	Issue #22 · 2021-02
Eglo Crossling ETriSpot 85 RGBW spot	Works Local	Confirmed working, HW 4.31 firmware 2.2.6 Saved copy … not an issue -- just didn't know of a better way to let you know. Anyhow, I can confirm that the integration works with following lights (THANKS!): - ESpot 120 (Eglo Crossling RGBW Spot with diameter of 120 mm, HW 4.30, firmware 2.2.6) - ETriSpot 85 (set of 3 Eglo Crossling RGBW Spots with diameter of 85 mm, HW 4.31, firmware 2.2.6) - ESpot 170 (Eglo Crossling RGBW Spot with diameter of 170 mm, HW 4.30, firmware 2.2.6) Also, from the RPi 4B, where I run the HA, it is circa 10 meters to the lights. Integrated bluetooth on the RPi couldn't make it. So, I disabled it in the /boot/config.txt by … Excerpt saved from GitHub on 2026-10-23.	Issue #22 · 2021-02
Eglo ECeilG60 and EPanel120 / EPanel600	Works Local	Listed in README, HW 4.0 Saved copy Supported devices: Bluethoot devices that use the ble.tlmesh protocol; Eglo (120) RGBW spots (ESpot120` HW v4.3); LED strip 3m (HW v4.0 and v4.3); LED strip 5m (HW v4.3); ECeilG60` (HW v4.0); EPanel120` (HW v4.0); EPanel600` (HW v4.0); Eglo Fueva-C RGB CCT; Eglo Crossling RGBW Spot (ETriSpot 85 HW 4.31, firmware 2.2.6); Eglo Crossling RGBW Spot (ESpot 170 HW 4.30, firmware 2.2.6); Eglo Connect Plug Plus (on/off support over Bluetooth); .ble.zigbee.light. are not supported. Recommended to use a ZigBee integration like https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX; .wifi.light. … Excerpt saved from the README on 2026-10-23.	README
Eglo Fueva-C RGB CCT light	Works Local	Works without issues Saved copy Tested with Eglo Fueva C Light - Works without any issues at the moment. Thanks for development! Works so much better than original Awox APP!!! Excerpt saved from GitHub on 2026-10-23.	PR #19 · 2021-01
Eglo LED strip 3m / 5m	Works Local	Listed in README (HW 4.0 and 4.3) Saved copy Supported devices: Bluethoot devices that use the ble.tlmesh protocol; Eglo (120) RGBW spots (ESpot120` HW v4.3); LED strip 3m (HW v4.0 and v4.3); LED strip 5m (HW v4.3); ECeilG60` (HW v4.0); EPanel120` (HW v4.0); EPanel600` (HW v4.0); Eglo Fueva-C RGB CCT; Eglo Crossling RGBW Spot (ETriSpot 85 HW 4.31, firmware 2.2.6); Eglo Crossling RGBW Spot (ESpot 170 HW 4.30, firmware 2.2.6); Eglo Connect Plug Plus (on/off support over Bluetooth); .ble.zigbee.light. are not supported. Recommended to use a ZigBee integration like https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX; .wifi.light. … Excerpt saved from the README on 2026-10-23.	README
AwoX mesh lights unresponsive	Partly works Local	Lights disconnect and ignore commands; improved reconnect handling Saved copy But didn't the lights work anymore? Because HA should try to reconnect when a new command is triggered (trying to turn on the light for instance). Do you also have the awox app connected to the lights? That also makes the connection unstable. Excerpt saved from GitHub on 2026-10-23.	Issue #50 · 2021-10
Eglo Connect Plug Plus	Partly works Local	On/off only over Bluetooth Saved copy Supported devices: Bluethoot devices that use the ble.tlmesh protocol; Eglo (120) RGBW spots (ESpot120` HW v4.3); LED strip 3m (HW v4.0 and v4.3); LED strip 5m (HW v4.3); ECeilG60` (HW v4.0); EPanel120` (HW v4.0); EPanel600` (HW v4.0); Eglo Fueva-C RGB CCT; Eglo Crossling RGBW Spot (ETriSpot 85 HW 4.31, firmware 2.2.6); Eglo Crossling RGBW Spot (ESpot 170 HW 4.30, firmware 2.2.6); Eglo Connect Plug Plus (on/off support over Bluetooth); .ble.zigbee.light. are not supported. Recommended to use a ZigBee integration like https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX; .wifi.light. … Excerpt saved from the README on 2026-10-23.	README
AwoX ble.zigbee lights	Won’t be supported	Not supported; use a Zigbee integration instead Saved copy Supported devices: Bluethoot devices that use the ble.tlmesh protocol; Eglo (120) RGBW spots (ESpot120` HW v4.3); LED strip 3m (HW v4.0 and v4.3); LED strip 5m (HW v4.3); ECeilG60` (HW v4.0); EPanel120` (HW v4.0); EPanel600` (HW v4.0); Eglo Fueva-C RGB CCT; Eglo Crossling RGBW Spot (ETriSpot 85 HW 4.31, firmware 2.2.6); Eglo Crossling RGBW Spot (ESpot 170 HW 4.30, firmware 2.2.6); Eglo Connect Plug Plus (on/off support over Bluetooth); .ble.zigbee.light. are not supported. Recommended to use a ZigBee integration like https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX; .wifi.light. … Excerpt saved from the README on 2026-10-23.	README

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local push

Talks to the device on your network, and the device tells Home Assistant the moment something changes.

Details

Installs (analytics)	159 (0.02%)
GitHub stars	94
Latest version	0.2.0 (2026-10-20)
Set up in the UI	Yes
Maintainers	@fsaris
License	MIT

Devices listed in its README

Bluethoot devices that use the ble.tlmesh protocol
Eglo (120) RGBW spots (ESpot120` HW v4.3)
LED strip 3m (HW v4.0 and v4.3)
LED strip 5m (HW v4.3)
ECeilG60` (HW v4.0)
EPanel120` (HW v4.0)
EPanel600` (HW v4.0)
Eglo Fueva-C RGB CCT
Eglo Crossling RGBW Spot (ETriSpot 85 HW 4.31, firmware 2.2.6)
Eglo Crossling RGBW Spot (ESpot 170 HW 4.30, firmware 2.2.6)
Eglo Connect Plug Plus (on/off support over Bluetooth)
.ble.zigbee.light. are not supported. Recommended to use a ZigBee integration like https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX
.wifi.light. are currently not supported see https://github.com/fsaris/home-assistant-awox/issues/17

Notable forks

Forks with stars, or with code pushed at least 90 days after the original’s last push. Useful when the original goes quiet.

Fork	Stars	Last push	Description
SleepyNinja0o/home-assistant-zengge	★ 9	2026-03-31	Zengge mesh light integration for Home Assistant

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.

Sources

Documentation: https://github.com/fsaris/home-assistant-awox
Source code: https://github.com/fsaris/home-assistant-awox
Issues: https://github.com/fsaris/home-assistant-awox/issues
HACS: https://hacs.xyz