BLE ADV Ceiling Fan / Lamps

Description ## 🧪 Change Type - [ ] 🐛 Bug Fix - [ ] ✨ New Feature - [ ] 🚀 Perf improvment / Refactoring - [X] ✨ New codec - [ ] 📝 Documentation ## 📋 Checklist - [X] Once opened, I will link the Issue where this change was discussed and approved by the maintainer - [X] I read the Contribution Guidelines of the project and this change fully complies with them. - [X] I tested my software on a live HA server - [X] I added Unit Tests to test my new software - [X] I ran the existing Tests and all are OK

Excerpt saved from GitHub on 2026-10-23.

This PR adds support for Mantra R00134 physical remotes that control fans with lights such as the Nepal Mini, resolves #279. ### Problem The R00134 remote was recognized, but only some of its buttons were syncing to Home Assistant and after enough presses the remote stopped syncing entirely. ### Fix - Opt-in translator set: all R00134 signals are decoded by a dedicated `"R00134 remote"` translator set on the `mantra_v0` codecs, using the new multi translator set support. The default translators are strictly unchanged, so there is zero impact for existing users. Owners of an R00134 select the …

Excerpt saved from GitHub on 2026-10-23.

… particular if either of the mandatory info is not given then your request is useless and will be Closed. - [x] This only contains 1 "Support New Physical Remote" request (if you have multiple requests, open one request for each). - [x] This issue is not a duplicate "Support New Physical Remote" request of previous requests. ### Supported Android Application controlling your Device (effectivelly or as per provider documentation) There are no apps that seem to control this device, except Using the ble_adv.inject_raw service with the captured hex strings successfully controls the fan, but only …

Excerpt saved from GitHub on 2026-10-23.

Hello @soniaalemany From what I see you have a `Mantra` Device, please be aware we are facing issues with this codec so before starting I would need to know if you tried to use the 'Duplicate' flow from the paired Mantra App or from your Remote R00128. As far as I can see the light ON/OFF should work at least (the light should blink during duplication), do you confirm? EDIT: I would also need the type of your Mantra Device (Groenland / Alisio / Nepal mini / other...) Thanks

Excerpt saved from GitHub on 2026-10-23.

Support for Smart Light (Agarce) Physical Remotes This PR adds support for Smart Light (Agarce) physical remote controls (specifically those using prefix `0x03` and `0x04` such as the Revneey ceiling fan/light remote). It enables decoding incoming remote signals and sending direct controls from Home Assistant, resolving #191 and #58. ## Problem Physical remotes for these controllers utilize a protocol family similar to the existing `agarce` (app-based) codec but with key structural differences: 1. Decryption Seeding: The remote utilizes a 4-byte seed (compared to the app's 2-byte seed) to …

Excerpt saved from GitHub on 2026-10-23.