Media & entertainment
Cambridge Audio
cambridge_audio
Built inLocal pushPlatinum
The Cambridge Audio integration allows you to control all receivers and streamers that support the StreamMagic app.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
media_player | Receiver | Needs its own HomeKit Bridge in accessory mode |
select | Mode picker (as switches) |
1 report below say how a device from this integration behaves in the Home app.
What people report
Wide range of Cambridge Audio streamers and amps are supported; only one setup-time IPv6 parsing error reported.
- Works14
- Partly works1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Cambridge Audio 851N | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio AXN10 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio CXN | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio CXN (v2) | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio CXN100 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio CXR120 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio CXR200 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio Edge NQ | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio Evo 150 | Works Local | Partly in Home Commands from HomeKit Bridge had no effect while state stale | State stopped updating; reconnect fix expected, closed completedSaved copyThe problem I attempted to use the new Cambridge Audio Integration with my Evo 150, but after a short period, the device state is no longer updated. For example, it continues to show as 'on' even though I turned it off using the physical buttons on the device. Additionally, attempting to send commands to the device through Home Assistant or the HomeKit Bridge has no effect. The attached debug log contains the corresponding error messages. Previously, I was using custom component cambridge_cxn without any issues. ### What version of Home Assistant Core has the issue? 2024.10.0 ### What was the … Excerpt saved from GitHub on 2026-10-23. | Issue #127485 · 2024-10 |
| Cambridge Audio Evo 75 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio Evo One | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio EXN100 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio MXN10 | Works | Listed as supported in the docsSaved copySupported devices: Cambridge Audio Evo One; Cambridge Audio Evo 75; Cambridge Audio Evo 150; Cambridge Audio CXN; Cambridge Audio CXN (v2); Cambridge Audio CXN100; Cambridge Audio CXR120; Cambridge Audio CXR200; Cambridge Audio 851N; Cambridge Audio MXN10; Cambridge Audio AXN10; Cambridge Audio EXN100; Cambridge Audio Edge NQ. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Cambridge Audio pre-amp models | Works | Pre-amp support added in media playerSaved copyProposed change Adds pre-amp support for the Cambridge Audio media player. ## Type of change - [ ] Dependency upgrade - [ ] Bugfix (non-breaking change Excerpt saved from GitHub on 2026-10-23. | PR #125699 · 2024-09 | |
| Cambridge Audio Evo 150 | Partly works | Setup occasionally fails parsing an IPv6 address from zeroconf discoverySaved copyThe problem The following error occurs occasionally when using Cambridge Audio integration. > 2025-01-30 21:55:23.040 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry Evo 150 for cambridge_audio > Traceback (most recent call last): > File "/usr/local/lib/python3.13/site-packages/yarl/_parse.py", line 134, in split_netloc > port = int(port_str) > ValueError: invalid literal for int() with base 10: '7e55:4542:0:fa54:f6ff:fedd:821b' > > During handling of the above exception, another exception occurred: > > Traceback (most recent call last): > File … Excerpt saved from GitHub on 2026-10-23. | Issue #137119 · 2025-02 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local push
Talks to the device on your network, and the device tells Home Assistant the moment something changes.
Found automatically over
- Bonjour (zeroconf)
Details
| Installs (analytics) | 519 (0.07%) |
|---|---|
| Quality scale | Platinum |
| Added in | Home Assistant 2024.10 |
| Set up in the UI | Yes |
| Maintainers | @noahhusby |
Devices listed in its documentation
- Cambridge Audio Evo One
- Cambridge Audio Evo 75
- Cambridge Audio Evo 150
- Cambridge Audio CXN
- Cambridge Audio CXN (v2)
- Cambridge Audio CXN100
- Cambridge Audio CXR120
- Cambridge Audio CXR200
- Cambridge Audio 851N
- Cambridge Audio MXN10
- Cambridge Audio AXN10
- Cambridge Audio EXN100
- Cambridge Audio Edge NQ
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
