LCN
LCN SH/UPP shutter outputs
Windows and Coverings · Climate
Partly works
1 report: 1 says it partly works.
Reported with 1 integration: LCN.
What people report
| Integration | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| LCN | Partly works | Motor outputs send 8 second ramp; stop leaves cover showing openSaved copyThe problem I have an issue with LCH modules (SH & UPP) that have shutters configured as motors on the output switches of the modules. Relais as motor output work fine by the way. Up and down commands (ON of output #1 / output #2) are send with a "ramp" of 8 seconds. That causes the outputs to dimm from 0% to 100% in 8 seconds. That is not expected. Seems that this issue was once resolved in 2024.9.0 but it seems still happen with my modules (I have only older modules). https://community.home-assistant.io/t/lcn-with-output-shutters/729746/1 Module firmware is 0D08xxxx and 0E09xxxxx ### What … Excerpt saved from GitHub on 2026-10-23. | Issue #159204 · 2025-12 |
Each row is one report from a GitHub thread, an integration’s docs, or r/homeassistant. Check the date and the linked source before you buy.
In ReReHome
Once Home Assistant’s HomeKit Bridge shares it, this device reaches Apple Home as a HomeKit accessory behind your Home Assistant bridge, so ReReHome shows and controls it like any other.
Identifiers
| Brand | LCN |
|---|---|
| Model | SH, UPP |
| Category | Windows and Coverings |
