Jablotron 100
kukulich/home-assistant-jablotron100 · v3.35.0
Home Assistant custom component for JABLOTRON 100+ alarm system
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
alarm_control_panel | Security system | |
binary_sensor | Sensor (motion, contact, leak, smoke…) | |
sensor | Sensor (temperature, humidity, air quality…) |
What people report
Jablotron 100 control panels work over a USB cable to the HA host (no LAN/GSM link used for the integration). Maintainer answers compatibility questions in Czech or English.
- Works4
- Partly works2
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Jablotron Indexa 9000 (JA-14K) central unit | Works | Treated as JA-101 similar; adds power supply, LAN and GSM sensorsSaved copyThis improves support for JA-14K central units by marking them as JA-101 similar systems. This adds sensors for the following three devices: * Power Supply (device 124) * LAN Network (device 125) * GSM Network (device 127) The related messages look like this: [code] The GSM signal strength might be improved, but I'm unsure if it's included in the mess Excerpt saved from GitHub on 2026-10-23. | PR #118 · 2025-07 | |
| Jablotron JA-103KR with JA-194Y LTE communicator | Works Local | Owner: integration runs over USB, so the GSM/LTE module should not affect itSaved copyHi, I'm planning to install Jablotron 100+ system and would like to confirm compatibility before purchasing. Instead of buying JA-103KRY as a complete unit (which includes JA-192Y communicator), I'm planning to buy: JA-103KR (central unit) JA-194Y (LTE communicator module, newer than JA-192Y) The integration will connect via JA-121T over RS485 (not USB), so I assume the communicator module has no effect on RS485 communication with Home Assistant. Questions: Is JA-103KR + JA-194Y functionally equivalent to JA-103KRY for this integration? Is there any known issue with JA-194Y vs JA-192Y in … Excerpt saved from GitHub on 2026-10-23. | Issue #128 · 2026-04 | |
| Jablotron JA-107K central unit | Works | Supports up to 230 devicesSaved copyHi! My JA-107-K support 230 devices. This patch add support for that. Please consider adding it to the main repo. Excerpt saved from GitHub on 2026-10-23. | PR #77 · 2023-08 | |
| Jablotron keypad with door opening detector | Works | Keypad with door opening detector supportedSaved copyThe original text was already deleted or overwritten when we archived it. | PR #84 · 2023-11 | |
| Jablotron JA-101K-LAN | Partly works Local | Connects over USB only; LAN sensor just monitors the panel's LAN linkSaved copyIn release 2.0.0: Added LAN connection sensor if central unit is connected via LAN - Only JA-101K-LAN supported currently Excerpt saved from GitHub on 2026-10-23. | Issue #7 · 2020-12 | |
| Jablotron JA-103K | Partly works Local | LAN connection sensor showed connected with no cable; GSM signal doubtedSaved copyLAN: What means "No cable connected to control panel" ? JA-103K has support of LAN. Does it mean you don't use it and don't have control panel connected to LAN? GSM: Did you check your signal strength in F-link/J-link ? Excerpt saved from GitHub on 2026-10-23. | Issue #12 · 2020-12 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local push
Talks to the device on your network, and the device tells Home Assistant the moment something changes.
Details
| Installs (analytics) | 363 (0.05%) |
|---|---|
| GitHub stars | 101 |
| Latest version | 3.35.0 (2026-10-12) |
| Set up in the UI | Yes |
| Maintainers | @kukulich |
| License | MIT |
Devices listed in its README
- Devices with two states (on/off, active/inactive, open/closed etc.) are supported.
- Sabotage or problem of the device is supported in specific "problem" sensor.
- Temperature is reported for thermostats, thermometers and smoke detectors.
- Pulses are reported for electricity meters with pulse output.
- Signal strength is reported for wireless devices.
- Battery level is reported for devices with battery.
- Model, hardware and firmware versions are shown in device information when reported by a device.
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
