Nexia/American Standard/Trane
nexia
The Nexia/American Standard/Trane integration allows you to integrate your Nexia (Trane) thermostats or American Standard thermostats into Home Assistant.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
climate | Thermostat | |
binary_sensor | Sensor (motion, contact, leak, smoke…) | |
sensor | Sensor (humidity, temperature) | |
scene | Scene (as a switch) |
1 report below say how a device from this integration behaves in the Home app.
What people report
Cloud-polled Trane/American Standard XL thermostats are supported; newer UX360 is not.
- Works2
- Partly works1
- Won’t be supported1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Trane XL824 | Works Cloud | Listed by maintainer as supportedSaved copyThank you for reaching out. The UX360 is not supported by this integration https://www.home-assistant.io/integrations/nexia/#climate The following Trane thermostats are supported: XL1050, XL850, XL824 The following American Standard thermostats have been reported to work: AZONE1050, AZONE850, ACONT824 If you want to suggest a feature, you should try our Community Forum: Feature Requests. Excerpt saved from GitHub on 2026-10-23. | Issue #93193 · 2023-05 | |
| Trane XL850 | Works Cloud | Listed by maintainer as supportedSaved copyThank you for reaching out. The UX360 is not supported by this integration https://www.home-assistant.io/integrations/nexia/#climate The following Trane thermostats are supported: XL1050, XL850, XL824 The following American Standard thermostats have been reported to work: AZONE1050, AZONE850, ACONT824 If you want to suggest a feature, you should try our Community Forum: Feature Requests. Excerpt saved from GitHub on 2026-10-23. | Issue #93193 · 2023-05 | |
| Trane XL1050 | Partly works Cloud | Broken in Home Scene or automation set master stat to 74F regardless of value | Master stats set to 74F when run from a HomeKit sceneSaved copyThe problem I have traced this problem down to the exact devices. I have two Master XL1050 stats controlling 2 slave stats each. I am using HA core with the Nexia addon and HK bridge. This is a great package. The Master stats are the only one with the issue the slaves perform as they are suppose to. When an automation or a scene is run only the Master Xl1050 stats will return a set point value of 74F no matter what setting. If you manually set the master stats the set point changes as suppose to. ### What version of Home Assistant Core has the issue? core-2021.11.5 ### What was the last … Excerpt saved from GitHub on 2026-10-23. | Issue #61500 · 2021-12 |
| Trane Link UX360 | Won’t be supported Cloud | Not supported; zone ID duplicates; maintainer open to PRSaved copyThe problem I just had our Trane system upgraded to the new Link / UX360 thermostats. The integration mostly works, but cannot tell our two systems apart due to the Thermostat zone ID being the same `1` for both. This causes duplicate IDs and the in ability to control one of the units. ### What version of Home Assistant Core has the issue? core-2023.5.3 ### What was the last working version of Home Assistant Core? _No response_ ### What type of installation are you running? Home Assistant OS ### Integration causing the issue Nexia ### Link to integration documentation on our website … Excerpt saved from GitHub on 2026-10-23. | Issue #93193 · 2023-05 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Cloud polling
Goes through the maker’s cloud, asking it for updates every so often. Needs the internet and an account.
Found automatically over
- DHCP
Details
| Installs (analytics) | 1,229 (0.17%) |
|---|---|
| Added in | Home Assistant 0.108 |
| Set up in the UI | Yes |
| Maintainers | @bdraco |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
