NX584
nx584
The NX584 integration provides integration with GE, Caddx, Interlogix (and other brands) alarm panels that support the NX584 interface module (or have it built in). Supported panels include NX4/6/8/8E. Actual integration is done through pynx584 which is required for this to work.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
alarm_control_panel | Security system | |
binary_sensor | Sensor (motion, contact, leak, smoke…) |
What people report
NX584 alarm panels work via a pynx584 server; arming away needs an entry zone tripped, and the server occasionally stops reporting.
- Partly works1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| NX584 alarm panel | Partly works Local | Away arming needs entry zone tripped; bypass services addedSaved copyThe problem It looks like NX584 does an alarm-exit with pynx584 which then requires an entry zone to be tripped to go into armed away mode, otherwise it goes into armed stay mode. pynx584 also has an alarm-auto which ignores this requirement. This is fine if you are inside the house setting the alarm but doesn't work well if you try to fully arm the system remotely. ### What version of Home Assistant Core has the issue? current 8.2 ### What was the last working version of Home Assistant Core? _No response_ ### What type of installation are you running? Home Assistant OS ### Integration … Excerpt saved from GitHub on 2026-10-23. | Issue #73688 · 2022-06 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local push
Talks to the device on your network, and the device tells Home Assistant the moment something changes.
Details
| Installs (analytics) | 23 |
|---|---|
| Quality scale | Legacy |
| Added in | Home Assistant 0.13 |
| Set up in the UI | No, YAML |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
