Climate
Plugwise
plugwise
Built inLocal pollingPlatinum
Plugwise provides smart home devices that allow you to monitor and control your climate, energy (including gas) consumption, and energy production. The energy information can be used for the energy dashboard.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
climate | Thermostat | |
binary_sensor | Sensor (motion, contact, leak, smoke…) | |
sensor | Sensor (air quality, humidity, light level, temperature) | |
water_heater | Water heater (as a thermostat) | |
button | Button (as a switch) | |
select | Mode picker (as switches) |
3 reports below say how a device from this integration behaves in the Home app.
What people report
Plugwise Anna, Adam, Smile P1, Stretch and Emma work locally, with new models added through 2025. Climate presets do not appear in Apple Home.
- Works4
- Partly works4
- Not working1
- Requested1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Plugwise Anna P1 | Works Local | Support addedSaved copyProposed change Add support for the new Plugwise Anna P1, the plugwise library implements most of this update. https://github.com/plugwise/python-plugwise/releases/tag/v1.9.0 https://github.com/plugwise/python-plugwise/compare/v1.8.3...v1.9.0 Also, a climate testcase was replaced, Excerpt saved from GitHub on 2026-10-23. | PR #155916 · 2025-11 | |
| Plugwise Smile P1 | Works Local | 3-phase DSMR support addedSaved copyPlugwise Smile P1: add support for 3-phase DSMR's, via plugwise v0.27.0 https://github.com/plugwise/python-plugwise/releases/tag/v0.27.0 https://github.com/plugwise/python-plugwise/compare/v0.25.14...v0.27.0 ## Proposed change ## Type of change <!-- What type of change does your Excerpt saved from GitHub on 2026-10-23. | PR #85421 · 2023-01 | |
| Plugwise Stretch with Circle plugs | Works Local | Support for older circle/stealth plugs addedSaved copyProposed change Add support for Plugwise Stretch for switching devices (i.e. this makes using older circle/stealth plugs possible). Within restructuring for these plugs we also can close #38238. As per request link to our Changelog for the version bump for the final modifications for Stretch support. Additionally some minor corrections (sorting CONSTs and better usage of CONSTs) and additional fixtures for the stretch platform (and config_flow accordingly). ## Type of change - [ ] Dependency upgrade - [ ] Bugfix (non-breaking change which fixes an issue) - [ ] New Excerpt saved from GitHub on 2026-10-23. | PR #40108 · 2020-09 | |
| Plugwise thermostats | Works | Used with HA since 2018Saved copyI use the plugwise line since 2018 with HA: https://www.plugwise.com Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23. | Reddit comment · 2026-03 | |
| Plugwise Anna thermostat | Partly works Local | Partly in Home Climate presets are unavailable in Home app; scenes used instead | Works; presets cannot be chosen in HomeKit, input_select workaroundSaved copy… detour: by creating an input select Entity that has all options for the presets. Next I created an automation for each option to set the preset of the thermostat. I then forwarded the input select to Homekit and created a Home and Away automation or any automation to trigger the desired preset. Benefit to this approach is that my spouse can still use the Plugwise app or the physical thermostat to change temps on the different presets. When using presets they are the same on each platform you use them (f.e. Plugwise app, Homekit or HA) Excerpt saved from GitHub on 2026-10-23. | Issue #85692 · 2023-01 |
| Plugwise Emma | Partly works Local | Initial support, only when connected to an AdamSaved copyProposed change Add initial support for the Emma via plugwise v1.8.0 Emma connected to an Adam is only supported at the moment, connected via ZigBee was tested, a wired connection should also work (not yet tested). Support for E Excerpt saved from GitHub on 2026-10-23. | PR #154277 · 2025-10 | |
| Plugwise Lisa thermostat | Partly works | Partly in Home Target range shows 0-100 C, making precise setting hard | Max temperature range too wide; fixed after reportSaved copyThe problem I have several Lisa thermostats in my house. They have been exposed to HomeKit, where the range of the thermostat is between 0-100 degrees celcius. This makes it extremely difficult to set a specific temperature. It it possible to set a temperature unit specific range and if so, correct the range for the Celsius scale? ### What version of Home Assistant Core has the issue? core-2023.11.2 ### What was the last working version of Home Assistant Core? _No response_ ### What type of installation are you running? Home Assistant OS ### Integration causing the issue plugwise ### Link to … Excerpt saved from GitHub on 2026-10-23. | Issue #104023 · 2023-11 |
| Plugwise thermostat | Partly works Local | Partly in Home No preset options exposed in Home app | All climate integrations lack HomeKit presets; scene workaroundSaved copy… detour: by creating an input select Entity that has all options for the presets. Next I created an automation for each option to set the preset of the thermostat. I then forwarded the input select to Homekit and created a Home and Away automation or any automation to trigger the desired preset. Benefit to this approach is that my spouse can still use the Plugwise app or the physical thermostat to change temps on the different presets. When using presets they are the same on each platform you use them (f.e. Plugwise app, Homekit or HA) Excerpt saved from GitHub on 2026-10-23. | Issue #85692 · 2023-01 |
| Plugwise Smile P1 and Anna | Not working Local | Stopped after 2022.11 update; fix path unclear, firmware update suggestedSaved copyThe problem I have both Plugwise Anna and P1 configured. Both worked with HA 2022.10.5 After upgrading to HA 2022.11.0 and 2022.11.1 made The Anna dissapear with no error P1 stopped working to but P1 did output error data. ### What version of Home Assistant Core has the issue? 2022.11.0 ### What was the last working version of Home Assistant Core? 2022.10.5 ### What type of installation are you running? Home Assistant Core ### Integration causing the issue Plugwise ### Link to integration documentation on our website https://www.home-assistant.io/integrations/plugwise ### Diagnostics … Excerpt saved from GitHub on 2026-10-23. | Issue #81672 · 2022-11 | |
| Plugwise Anna thermostat | Requested | Asked about as a local option; no experience reportedSaved copyRecommendations for a local smart thermostat. Hello there. I'm looking for a smart thermostat for my (soon-to-be) home. I'd like a device that works completely locally, or as much as possible. Since I live in Europe, Ecobee is not an option. The models I've been looking into are: * Plugwise Anna * Honeywell Lyric T6 (Y6H810WF1005, it does not seem to be the zwave version often mentioned in this sub) Other models like Google Nest, Netatmo or Tado are available but from my understanding they are cloud based. Does anyone have experience with either of them? Thanks a lot! Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23. | Reddit thread · 2023-04 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local polling
Talks to the device on your network, asking it for updates every so often.
Found automatically over
- Bonjour (zeroconf)
Details
| Installs (analytics) | 890 (0.13%) |
|---|---|
| Quality scale | Platinum |
| Added in | Home Assistant 0.98 |
| Set up in the UI | Yes |
| Maintainers | @CoMPaTech, @bouwew |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
