Sensors

VersaSense

versasense

Built inLocal polling

The VersaSense integration supports the VersaSense Edge Gateway. The gateway can control hubs and their peripherals (sensors and actuators) in the mesh network.

Documentation Source code

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`switch`	Switch or outlet

What people report

VersaSense sensors, actuator and SmartMesh hubs are listed as supported.

Works7

Device	In Home Assistant	What they said	Source
VersaSense M01 SmartMesh edge gateway	Works	Listed as supported in the docs Saved copy … S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense Pxx SmartMesh IP hub	Works	Listed as supported in the docs Saved copy … devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense S03/S04 temperature and humidity sensor	Works	Listed as supported in the docs Saved copy Supported devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense S06 barometric pressure sensor	Works	Listed as supported in the docs Saved copy Supported devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense S10 light sensor	Works	Listed as supported in the docs Saved copy Supported devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense S17 object detection sensor	Works	Listed as supported in the docs Saved copy Supported devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
VersaSense S19 buzzer actuator	Works	Listed as supported in the docs Saved copy Supported devices: S03 S04: Temperature and Humidity sensor; S06: Barometric Pressure sensor; S10: Light sensor; S17: Object detection sensor; S19: Buzzer actuator; Pxx: SmartMesh IP Hub; M01: SmartMesh Edge Gateway. Excerpt saved from home-assistant.io on 2026-10-23.	Docs

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local polling

Talks to the device on your network, asking it for updates every so often.

Details

Quality scale	Legacy
Added in	Home Assistant 0.103
Set up in the UI	No, YAML
Maintainers	@imstevenxyz

Devices listed in its documentation

S03 S04: Temperature and Humidity sensor
S06: Barometric Pressure sensor
S10: Light sensor
S17: Object detection sensor
S19: Buzzer actuator
Pxx: SmartMesh IP Hub
M01: SmartMesh Edge Gateway

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.