Chamberlain MyQ garage door opener

Switch to the MyQ plugin. I discontinued the chamberlain plugin, and the MyQ one works better.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I am tired with the MyQ and Homekit plugin. I bought the Meross Garage openner and it works with Homekit reliably

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I was always relatively happy with my myQ “smart hub” with the Homebridge plugin (occasional issues are understandable imho) but I recently moved to a new house and was gutted the existing openers weren’t compatible. Well a couple days ago I accidentally discovered their new hub and noticed it added support for a lot of other openers, including mine! Since I literally considered buying a whole new garage door opener 😵 this was a happy discovery. Just in case someone else out there is having the same frustration… Eg …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I had to do this for the chamberlain myq garage opener. Way better though homebridge. That was in my old house and I’ve had no problems running the Meross opener directly through homekit.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

typo on password. Now connected. ​ \[2/6/2022, 10:18:36 PM\] \[myQ\] myQ API: Successfully connected to the myQ API. \[2/6/2022, 10:18:37 PM\] \[myQ\] myQ API: Discovered device family garagedoor: Two Door Garage Door (serial number: CG0850787671, gateway: GW0A0012AF31). \[2/6/2022, 10:18:37 PM\] \[myQ\] myQ API: Discovered device family gateway: Two Door Garage Door \[Chamberlain WiFi GDO AC\] (serial number: GW0A0012AF31). \[2/6/2022, 10:18:37 PM\] \[myQ\] Two Door Garage Door: Adding garagedoor device to HomeKit: Two Door Garage Door (serial number: CG0850787671, gateway: …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I run homebridge and the the myq plug-in and it works flawlessly on my 2 hubs and 3 doors with HomeKit.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

… one has me stumped as every tweak or change or setting I’ve found is done. Up to last year, I used HOOBS on a RP for many things including homebridge-myq. It was just simpler at the time and myQ worked great there and my garage door always showed up in CarPlay when I got close to home. I’ve since did a install of Homebridge on my Synology and started from scratch with plugins. Everything works great, including homebridge-myQ. But it refuses to show in CarPlay. There’s conflicting solutions, so I’ve tried lots, and I leave weeks in between each. Non-exhaustive list of the most common solutions …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

There's a thread on Github and the author of myq-homebridge has updated the plugin and it's working again.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

… need for the config file is just your username and password. Just make sure you put it under accessories. *oh and the device id if you have more than one garage door.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Happy new year to you as well! I would have to say Homebridge-Chamberlain, since I can open my garage when I get home on my bike from my watch easily.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

This plugin generally treats all devices as if they were Z-Wave devices. What this means is that it expects HomeSeer to use "standard" Z-Wave values to indicate things like "on" (Value = 255), "off" (value = 0), "Open" (value =255), "closed" (value =0), etc. If you have a device or plugin that uses different values, you can "map" it to Z-Wave using virtual devices and events. I'll illustrate this by example for a Garage Door Opener. Z-Wave and this plugin expect a Garage Door Opener to use the value of 255 to indicate "open" and the value of 0 to indicate "closed". However, I understand that …

Excerpt saved from GitHub on 2026-10-22.

Plug-in update just released. Changes to a random user string to avoid API detection - now working for me.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

The plug-in works again.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Yes. MyQ changed their API, plugin owner is working on a fix

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Dump the myQ and buy a Meross opener. Not trying to sound facetious, I suffered myQ for five years with so many issues. Then I bought a Meross opener and it has worked reliably and consistently ever since. Oh and setup made me laugh out loud it was so simple and error free. Just friendly advice coming from a former myQ sufferer. 😀

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Bro this is literally the 5th post about myQ being down. If you just did a little more digging you would’ve found the answer. Just revert to 3.4.2 and disable the plug-in for 12 to 24 hours and it should be good. Mine has been back up and running for 4 or 5 days.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Mine started working as well after downgrading to 3.4.2. Took a few hours though as it was reporting 429 errors after the initial downgrade.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I’m always open to options. My issue is specifically with closing via the myQ App, or Hoobs. I can always open the garage. But when I back out and go to close it, the beeps go off and nothing happens. And if I try to close it a couple times I get the error in the myQ app saying to manually close it to reset. I’ve also changed the sensor battery. No luck. I did check hoobs logs once and it didn’t have anything. But I checked just now and saw this. But unsure it is related. 5/30/2020, 9:44:14 AM [Garage] FetchError: request to …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

MyQ is actively trying to prevent third parties to utilize the API. There are a bunch of posts about this in the Home Assistant GitHub MyQ integration page.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

API is no longer available, MyQ block it. Has been discussed here many times. Search for the subject and you will find other possible solutions as replacement.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Chamberlain/Liftmaster/MyQ killed access for the plugin

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Yes chamberlain is deliberately breaking the api. Switch to meross.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Man, I'm pulling my hair out. Trying to install the Liftmaster2 plugin on my Pi. Ive got the Pi running Docker with no other plugins installed. I've tried installing the plugin using this command: ​ npm install -save git+https://github.com/luisiam/homebridge-liftmaster2.git ​ And while installing it gives me this message, which isn't clear to me that it's even installed: ​ (node:16879) \[DEP0022\] DeprecationWarning: os.tmpDir() is deprecated. Use os.tmpdir() [email protected] node\_modules/homebridge-liftmaster2└── [email protected] ([email protected], …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

MyQ will be a problem too because they are an evil company and have blocked any API from working with them. You’ll need something like Meross or Ratgdo ( I have used Meross for years)

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.