Tasmota ZbBridge
homebridge-tasmota-zbbridge · v2.0.4
Controls Tasmota and Zigbee devices through an MQTT broker, via Zigbee2Tasmota or Zigbee2MQTT.
What it says it supports
Brands
- Tasmota
- Zigbee
Devices it names
- Tasmota outlets
- lightbulbs
- RGB strips
- buttons
- contact sensors
- valves
- locks
- Zigbee bulbs
Shows up in Apple Home as from its README
What people report
Works with Tasmota ZbBridge Zigbee devices such as contact sensors and RGBW bulbs; the maintainer fixed regressions quickly. Zigbee blinds are not supported.
- Works2
- Partly works1
- Requested1
| Device | Status | What they said | Source |
|---|---|---|---|
| Zigbee contact sensors via ZbBridge | Works | Fixed after report: two sensors broke in 1.5.0, work in 1.5.1Saved copyDescribe Your Problem: I have problems with 2 contact sensors in my configuration. First they worked ok but recently I noticed one was stopping reporting state changes. So I removed both and added them again. Then just one was added as an accessory, completely ignoring the second one. Solution was to roll back to plugin version 1.4.4 and add the sensors again. Now it works all fine again. Updating to 1.5.0 brings back the issue. Hope you can fix it in upcoming versions! Otherwise it is a great plugin! Logs: [16/10/2022, 16:47:24] [ZbBridge] Executed didFinishLaunching callback [16/10/2022, … Excerpt saved from GitHub on 2026-10-22. | Issue #28 · 2022-10 |
| Zigbee lights with Adaptive Lighting | Works | Adaptive lighting added in v1.9.0Saved copyDescribe the solution you'd like: It would be great to support HomeKit Adaptive Lighting, in-line with similar homebridge plugins eg homebridge-mqtthing. Additional context: This would enable the colour temperature of lighting to change in-line with the time of day. Excerpt saved from GitHub on 2026-10-22. | Issue #36 · 2023-02 |
| Osram LIGHTIFY CLA60 RGBW bulb | Partly works | Needs ZbLight setup; color selection issues fixed in 0.12.1Saved copyUse first `ZbLight 0x4c9a, 4` to tell ZbBridge that you have RGBW bulb. And also configure it as `light4` in homebridge. If the color controls are not shown in the Home app try to set some color manually: [code] I think that sometimes detecting RGB lights doesn’t work properly but had got no time to debug it. I have two buggy "lidl" GU10 bulbs which have the color controls disabled (not working) each time I restart homebridge. Excerpt saved from GitHub on 2026-10-22. | Issue #10 · 2022-01 |
| Zigbee blind controllers | Requested | User asks for blind support via ZbBridge; openSaved copyI have not seen any support for Zigbee blind controller under zbridge. I probably missed it but In case I have not, please consider adding them. Excerpt saved from GitHub on 2026-10-22. | Issue #43 · 2024-03 |
Gathered from the plugin’s GitHub issues, pull requests, discussions, wiki and docs, and from r/homebridge. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local
MQTT broker
You’ll need
- MQTT broker
Compatibility
| Verified by Homebridge | Yes |
|---|---|
| Homebridge versions | ^1.6.0 || ^2.0.0 |
| Homebridge 2.0 | Yes |
| Node.js | ^v22 || ^v24 |
| Settings in Homebridge UI | Yes |
| Matter | No |
| Platform name | TasmotaZbBridge |
| License | Apache-2.0 |
Community signals
| Downloads a week | 44 |
|---|---|
| Downloads a month | 300 |
| GitHub stars | 10 |
| Open issues | 3 |
| Closed issues | 13 |
| Last code push | 2026-10-18 |
| Latest version | 2.0.4 (2026-05-09) |
| First published | 2020-09-27 |
| Releases | 70 |
In ReReHome
Whatever this plugin publishes reaches Apple Home as a normal HomeKit accessory behind your Homebridge bridge, so ReReHome shows and controls it like any other.
Bridges get their own settings page listing the accessories behind them.
