TP-Link Kasa

I have two p110 using homebridge. Works perfectly.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Each outlet in a multi-outlet device will now show as a separate device in homekit

Excerpt saved from GitHub on 2026-10-22.

… formats found here: https://gist.github.com/simont77/3f4d4330fa55b83f8ca96388d9004e7d#elgato-eve-energy-firmware-revision-131466 Added compatibility with newer HS110 hardware and software revisions that return energy metrics in much smaller units. The threshold-based inUse state requires the corresponding fix in tplink-smarthome-api to function correctly.

Excerpt saved from GitHub on 2026-10-22.

Each outlet in a multi-outlet device will now show as a separate device in homekit

Excerpt saved from GitHub on 2026-10-22.

… on my Pi, ran out of disk space, and so had to free up some space and reboot and such. Everything’s up and running, no errors, logs are good - but my Kasa devices just say Updating in the Home app. If I trigger a flow in Node-RED, it works - it is able to turn on/off the Kasa devices. The Hubitat devices are updating just fine in the Home app, so Home homebridge is working, what’s up with the Kasa devices?! No errors in the logs, either, and the devices never go to “No response” it just stays at “Updating” Help? Edit: Tried a few things, ended up removing the tp-link sub-bridge from Home …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Wanted to pass along some compatibility information. The new EP10, Kasa Smart Mini Plugs, pops up in the Home App, and functions as expected. The new KL125, Kasa Smart Bulb (Multicolor), shows up in the Home App, but would often show as No Response. The new KC400, Kasa Spot 2K Camera, does not work at all.

Excerpt saved from GitHub on 2026-10-22.

I just went all in on Kasa smart plugs/strips (HS103 and KP303) via Homebridge and they’ve been working flawlessly. I’ve been pleased with their build quality, UL certification, and app experience. Hopefully this means the price of the HS105 goes down a bit. This could end up being a significantly cheaper version of Eve Energy albeit with no native HomeKit or Thread support.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Just purchased and setup an HS103 and a KP400 without any issues. The plugin auto detected them and they work great.

Excerpt saved from GitHub on 2026-10-22.

Which plugin are you using? I’m using plasticrake’s homebridge-tplink-smarthome with a couple HS220s and several other TP-Link/Kasa devices without much trouble, along with the latest firmware for everything (though that’s never fixed/broken anything for me either). I use manual discovery (at this point I forget why) and have assigned static IPs to all my devices using my router’s software. If you don’t have static IPs set for your TP-Link devices, you must use the automatic discovery because the devices are not guaranteed to get the same IP address from your router. The “host” field is the …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Added HS230 3-way dimmer switch as a supported device. I have this switch and it has been working fine for on/off and brightness adjustment.

Excerpt saved from GitHub on 2026-10-22.

I was able to successfully get my KL50 filament bulb working with this plugin by following the readme, so have added it to the table of supported accessories

Excerpt saved from GitHub on 2026-10-22.

KP115 Kasa Smart WiFi Plug Slim with Energy Monitoring model is supported out of the box. https://www.tp-link.com/home-networking/smart-plug/kp115/

Excerpt saved from GitHub on 2026-10-22.

Successfully tested on KP200

Excerpt saved from GitHub on 2026-10-22.

Just purchased and setup an HS103 and a KP400 without any issues. The plugin auto detected them and they work great.

Excerpt saved from GitHub on 2026-10-22.

The original text was already deleted or overwritten when we archived it.

Successfully tested on switch KS200

Excerpt saved from GitHub on 2026-10-22.

Here's a view of my favourites in the home app. Favourite Homebridge plugin is Plex sensors, but use Nest, Nest cam, TP Link (have a load of plugs doing various things), automation switches and the Samsung Tizen plugin.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I’ve got around 15 Kasa light switches and dimmers in HK via home bridge. They are solid…1000% better than my Leviton switches which take turns going offline every few days. In fact, of ALL my HK devices, the Kasa switches are the most solid.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I've been using Google Home for a while now and invested in TP-Link Kasa devices because they work great and cost less than Wemo. However, we're an Apple ecosystem in this house so the only thing Google we have are some Nest Minis and a Nest Hub. I was just able to configure all of our smart switches and outlets using the TP-Link Kasa plugin and Homebridge and it's awesome! I'm running the Homebridge server on an old 2014 Mac mini. So far it's perfect and I love not having to open the Google Home app or use Google Assistant on my iPhone and simply can ask Siri to do everything. Just wanted to …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Same here, but I was wondering if the python plugin will support the new firmware that rendered my more HS220 unusable with tp-link smarthome.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

The newer hardware revisions don’t seem to work with this plugin. I migrated to Tapo and tried that plug-in but it still misses a few of my newer switches. I have 24 Kasa devices, 20 show in this plugin, 2 on the Tapo one, and 2 are in limbo. I’m slowly moving over to home assistant as that seems to recognize all of them.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

… They just need a way to push status updates from themselves back to HomeKit. This should result in a maximum two second delay. That is something that the Kasa switches simply cannot do. It is a limitation that I am willing to live with, however, as the only accessory is controlled automation but I'm using a Kasa device for is one for a virtual switch that only affects things under the hood in our smart home, so if there is a couple seconds late it's fine.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I'm a total noob to HomeBridge, but have the t-shirts from fighting with Home Automation since the X10 days, Homeseer, and various other dumb KickStarter & Indigogo investments that eventually died. I've added the Homebridge TPLink Smarthome Plugin, and it discovered a smattering (about half) of my Kasa switches (HS 105's) and lights (HS 200's), but not all of them. They're all on the same IP range/vLan. Tried a manual discovery by setting the Broadcast Address, but didn't change anything. The switches don't currently have static IP's, so I can't easily go to the next step of targeting hosts, …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

If you’re using version 8.0.1 of the plugin roll back to 7.x it solved the problem for me.

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

I'm using the TPLink Smarthome plugin and Caseta LEAP plugin. When I try to add my new Kasa HS210 "Entryway Light" to HomeKit, I scan the Homebridge QR code and it says it already has added the Pico switch. I rebooted HB and my phone, but the error continues. I can see the Entryway Light in the Accessories page of HB and can control it from there. Any ideas? Log: ​ \[06/02/2024, 17:27:08\] \[HB Supervisor\] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node\_modules --strict-plugin-resolution \[06/02/2024, 17:27:08\] \[HB Supervisor\] Started Homebridge v1.7.0 with …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Works with KL125P2 - add via Kasa app first to associate bulb to network, then homebridge discovers it immediately after.

Excerpt saved from GitHub on 2026-10-22.

… in a day or two, but you don't have to wait and can install it right now: 1. open Homebridge web UI plugins tab and remove the existing "homebridge-tplink-smarthome" plugin 2. click the search button for plugins and paste in this exactly: homebridge-tplink-smarthome-klap2 3. install the revised plugin (I recommend using a child bridge) 4. use the plugin configuration and enter your Kasa username (email) and password 5. restart the Homebridge 6. you should see your same accessories as before and the broken KL125 bulbs should be controllable again from iPhone Home app. In addition to KL125 …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Wanted to pass along some compatibility information. The new EP10, Kasa Smart Mini Plugs, pops up in the Home App, and functions as expected. The new KL125, Kasa Smart Bulb (Multicolor), shows up in the Home App, but would often show as No Response. The new KC400, Kasa Spot 2K Camera, does not work at all.

Excerpt saved from GitHub on 2026-10-22.

Which plugin are you using? I’m using plasticrake’s homebridge-tplink-smarthome with a couple HS220s and several other TP-Link/Kasa devices without much trouble, along with the latest firmware for everything (though that’s never fixed/broken anything for me either). I use manual discovery (at this point I forget why) and have assigned static IPs to all my devices using my router’s software. If you don’t have static IPs set for your TP-Link devices, you must use the automatic discovery because the devices are not guaranteed to get the same IP address from your router. The “host” field is the …

Excerpt saved from Arctic Shift Reddit archive on 2026-10-22.

Fix for issue #68 - add ability to ignore unsupported devices. This doesn't add support for KC120 camera, but by ignoring an unsupported device it allows homebridge-tplink-smarthome (and subsequently the rest of homebridge) to boot/run.

Excerpt saved from GitHub on 2026-10-22.